Then line up the 6 fingers to the hub area, REMBEMBER to make sure all the fingers are inside the hub.

Then press firmly in place with inward pressure until the hub cap is seated flat against the rim. Work it around pushing hard on the edges.

Important: Your Nut Cover will be secure until you are ready to change your tire, at which time you should also replace the two sided tape.

Buff it up and make it shine.

Thats how simple it is to install your new Chrome Nut Cover!

Tools are necessary for this step of installation.

We have suggested at least two pods for a minimum.

Strategically place LED's on the saddle bag so the lights will hit the radius of the chrome hub cap, especially on the lower half of the hub cap.
 
Suggestion: We use a piece of tin corner bead for drywall. Then put two sided tape for the lights on one side drilling a hole for the wires to come threw. The other side we two sided taped to the saddle bag, which allowed us to adjust the angle or direction the light would shine on the chrome hub cap! 

Example : We have six lights, three different colors, wired to a three button switch on top of the clutch reservoir.
 
We then can turn on 2 ,4 , or 6 lights at one time.
 
Wiring and switches will have to be done by YOU, or someone with the knowledge of electrical systems.

Mix and Match your colors to suit your personal tastes.

"A True Hub of Fire"
                GOD BLESS !